6865 NW 36 Ave.
Miami, Fl 33147
USA • Phone: 305-556-6251
Fax: 305-556-6256
sales@ac1supply.com
 
 
 

Paper-Faced Corner Bead
Eliminates unsightly corner cracks, chips and nail pops.

Platinum® paper-faced tape-on beads combine galvanized metal corner and edge
protection with high-grade paper tape to provide cost-effective, problem-free outside
drywall corner finishing. Paper-faced beads are available in a number of different widths
to suit most wallboard applications. Wider flange beads are used to cover imperfect
corners, while shorter flanges are used to achieve maximum efficiency.

Paper-faced beads virtually eliminate corner cracks, edge chips and nail pops.
These beads are applied using joint compound that embeds the paper bead to the
wallboard paper. No mechanical fasteners like nails, screws, staples or crimps are used.
Although paper-faced beads do cost more compared to traditional metal and vinyl, they
provide reduced labor and materials by reducing the amount of joint compound needed
and also eliminate one pass of finishing.

•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (no nails, staples, screws or crimps).
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Superior adhesion, bonding and paintability.
•Does not require nose coating.



Paper-Faced Splayed Corner Bead (P100)
High-performance off-angle tape-on bead is ideal for finishing 120°/135°
offset corners


Platinum® off-angle tape-on bead, also known as splayed or 120/135° corner bead, is
used to provide a strong, smooth finish for outside off-angle drywall intersections.
Paper-faced tape-on off-angle bead is applied in the same manner as 90° paper bead.
Joint compound is used to embed the paperfaced bead to the wallboard paper.
The result is a clean, crisp, durable off- angle corner that will not crack or chip.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (no nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.
•Does not require nose coating.


Paper-Faced Inside Corner Bead (P2I)
Provides incredibly straight and smooth inside 90° corners for drywall finishing

Platinum® tape-on inside 90° paper-faced corner bead provides very straight and
precise inside corners. The rigid steel-reinforced inside corners provide a durable guide
to achieve exceptionally straight and sharp inside corners. Paper-faced inside corners
are embedded in joint compound and pressed firmly into place. Excess compound is
removed with a drywall knife.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (no nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.
•Does not require nose coating.

Paper-Faced Inside Splayed Corner Bead (P2OI)
Used to create a sharp, crisp line for finishing inside off-angle or inverted
splayed corners


Johns Manville unfaced building insulation is a lightweight, naturally white thermal and
acoustical fiber glass. It is made with Formaldehyde-free™ binder for better indoor air
quality. JM Unfaced Batts provide insulation in R-values from R-11 to R-38 and are also
effective in controlling unwanted noise in internal walls.

Platinum® off-angle tape-on 120/135° inside or reverse splayed bead is used to
achieve a crisp, clean, straightfinished inside off-angle drywall finish. This bead can be
used for inside corner angles between 120° and 135°. As with all tape-on beads,
off-angle bead is applied using joint compound. No mechanical fasteners are required.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (no nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.
•Does not require nose coating.

Paper-Faced Bullnose Tape-on (P1BO)
Creates elegant, rounded outside drywall corners adding contemporary styling
and a sense of openness to any room


Platinum® 3/4" tape-on bullnose corner bead is used to create a smooth, rounded look
to standard drywall corners. Paper-faced bullnose bead adds contemporary styling and
a sense of openness to any room. Tape-on bullnose is applied in the same manner as
all other tape-on beads. Joint compound is used to embed the paper-faced bead to the
wallboard paper. The result is a beautiful, rounded corner that will not crack or chip.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (No nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.
Material: 0.0125 galvanized coating


Paper-Faced Bullnose Splayed Tape-on (P0BO)
Provides rounded 120°–135° outside drywall corners for a
contemporary “modern“ look


Platinum® off-angle bullnose tape-on bead, also known as splayed bullnose or 120/135°
bullnose corner bead is used to provide a rounded, bullnose finish for off-angle drywall
intersections. Paper-faced tape-on off-angle bullnose bead is applied in the same
manner as 90° paper bead. Joint compound is used to embed the paper- faced bead to
the wallboard paper. The result is a clean, crisp, rounded off-angle corner that will not\
crack or chip.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (No nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.


Paper-Faced Bullnose Nail-On (P1BN)
Provides elegant and contemporary rounded drywall corners and is used when
nailing or mechanical fastening is desired


Platinum® 3/4" nail-on bullnose corner bead is used to create a smooth, rounded look
to standard drywall corners. Nail-on bullnose adds contemporary styling and a sense of
openness to any room.

Nail-on bead is applied in the same manner as traditional metal and vinyl beads.
Nails or mechanical fasteners are used to secure the bead to the wallboard.
Wide flange nail-on-bullnose is also available.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Superior adhesion, bonding and paintability

Paper-Faced Bullnose Splayed Nail-On (P00B)
Used to provide rounded 120°–135° outside drywall corners when nailing or
mechanical fastening is desired or required


Platinum® off-angle nail-on bullnose bead, also known as splayed bullnose or 120°–135°
bullnose corner bead, is used to provide a rounded bullnose finish for outside off-angle
drywall intersections.

Off-angle nail-on bead is applied in the same manner as traditional or vinyl off-angle
bullnose. Nails or mechanical fasteners are used to secure the bead to the wallboard.

•Virtually eliminates costly callbacks.
•Impervious to "scuffing" and "fluffing-up".
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Superior adhesion, bonding and paintability.


Paper-Faced Inner Cove Tape-on (P2BI)
Creates subtle, smooth, rounded inside or inner cove corners

Platinum® tape-on inner cove 90° paper-faced bead provides subtle, rounded inside or
inner corners. Inner cove tape-on beads are embedded in joint compound and pressed
firmly into place. Excess compound is removed with a drywall knife or wiped clean with
a rag.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing” and “fluffing-up.”
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (No nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.

Paper-Faced L-Trim (P4L)
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfaces

Platinum® L-Trims are used to finish the ends of wallboard where it abuts dissimilar
surfaces such as suspended ceilings, beams, plaster, masonry or untrimmed door and
window jambs. Tape-on L-Trims are applied in the same manner as all other tape-on
beads. Joint compound is used to embed the paper-faced bead to the wallboard paper.
Excess compound can be removed with a drywall knife or clean rag.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing“ and “fluffing-up.“
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (No nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.
•Does not require nose coating.

Paper-Faced Reveal Trim (PGR)
Used to create gentle insets or step-ins for aesthetically pleasing architectural
detailing


Platinum® reveal trims are used to finish wallboard terminations when the board abuts
other building materials such as suspended ceilings, beams, plaster, masonry and
untrimmed door and window jambs to create a clean step inset or reveal. Reveals help
create subtle, aesthetic architectural detailing around light fixtures, ceilings, walls and
soffits.

Paper-faced tape-on reveals are installed using joint compound to embed the reveal and
secure it to the wallboard. No mechanical fasteners are required. Also known as
“race track” bead.

•Virtually eliminates costly callbacks.
•Impervious to “scuffing“ and “fluffing-up.“
•Will not be damaged by sanding.
•Substantially reduces joint compound consumption and eliminates one finish coat.
•Does not require mechanical fastening (No nails, staples, screws or crimps).
•Superior adhesion, bonding and paintability.
•Does not require nose coating.


 
  ©2010 AC1 SUPPLY, INC - All rights reserved
Web Design & Development by Quint Advertising, Inc